# Configuration de la clé Sonoff zigbee 3 Dongle Plus V2
 
## Path proxmox2 qemu-server/123.conf
<code>
usb0: host=1a86:55d4
</code>

<code>

data_path: /config/zigbee2mqtt
socat:
  enabled: false
  master: pty,raw,echo=0,link=/tmp/ttyZ2M,mode=777
  slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5
  options: "-d -d"
  log: false
mqtt:
  base_topic: zigbee2mqtt
  server: mqtt://core-mosquitto:1883
  user: mqtt_adm
  password: *****************
serial:
  port: tcp://core-silabs-multiprotocol:9999
  adapter: ezsp
zigbee_herdsman_debug: false
homeassistant: true

</code>

https://dialedin.com.au/blog/sonoff-zbdongle-e-rcp-firmware

<code>
port: tcp://core-silabs-multiprotocol:9999
adapter: ezsp
</code>
# Mise à jour de la clé sonoff

<code>
universal-silabs-flasher --device /dev/serial/by-id/usb-1a86_USB_Single_Serial_5769002392-if00 \
       --bootloader-reset sonoff flash \
       --firmware Z3RouterUSBDonlge_EZNet6.10.3_V1.0.0.gbl
</code>

# Configuration de la clé SLZB-06M 
<code>
data_path: /config/zigbee2mqtt
socat:
  enabled: false
  master: pty,raw,echo=0,link=/tmp/ttyZ2M,mode=777
  slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5
  options: "-d -d"
  log: false
mqtt:
  base_topic: zigbee2mqtt
  server: mqtt://core-mosquitto:1883
  user: mqtt_adm
  password: euphaPueriesaif9aeghoh4ohdi7Lohgaetua4hahjeijai
serial:
  port: tcp://192.168.169.21:6638
  baudrate: 115200
  adapter: ezsp
advanced:
  transmit_power: 20
zigbee_herdsman_debug: false
homeassistant: true
</code>


# RFXcom
## Pour ajouter un volet
<code>071a0000{IDDUVOLET}01</code>
## ID des volets Somfy

- Cuisine: 061DA6
- Carole: 1BB9A5
- Maëlys: 38DC3D
- Manon: 2314EF
- SAM Droit: 52B263
- SAM Gauche: 74BF04
- Salon Baie vitrée: 4F47F1
- Salon Volet: 0F9FB9
- Sous-sol: 069E99