Differences

This shows you the differences between two versions of the page.

--- home-assistant [2024/08/11 08:08] – [ ID des volets Somfy] tychocelchu
+++ home-assistant [2024/12/11 20:30] (current) – tychocelchu
@@ Line 1: / Line 1: @@
 # Configuration de la clé Sonoff zigbee 3 Dongle Plus V2
+## Path proxmox2 qemu-server/123.conf
 <code>
-/dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20240123200624-if00
+usb0: host=1a86:55d4
+</code>
+<code>
+data_path: /config/zigbee2mqtt
+socat:
+  enabled: false
+  master: pty,raw,echo=0,link=/tmp/ttyZ2M,mode=777
+  slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5
+  options: "-d -d"
+  log: false
+mqtt:
+  base_topic: zigbee2mqtt
+  server: mqtt://core-mosquitto:1883
+  user: mqtt_adm
+  password: *****************
+serial:
+  port: tcp://core-silabs-multiprotocol:9999
+  adapter: ezsp
+zigbee_herdsman_debug: false
+homeassistant: true
-server: mqtt://localhost:1883
 </code>
@@ Line 15: / Line 36: @@
 # Mise à jour de la clé sonoff
-<code>universal-silabs-flasher --device /dev/serial/by-id/usb-1a86_USB_Single_Serial_5769002392-if00 \
+<code>
+universal-silabs-flasher --device /dev/serial/by-id/usb-1a86_USB_Single_Serial_5769002392-if00 \
        --bootloader-reset sonoff flash \
-       --firmware Z3RouterUSBDonlge_EZNet6.10.3_V1.0.0.gbl</code>
+       --firmware Z3RouterUSBDonlge_EZNet6.10.3_V1.0.0.gbl
+</code>
+# Configuration de la clé SLZB-06M
+<code>
+data_path: /config/zigbee2mqtt
+socat:
+  enabled: false
+  master: pty,raw,echo=0,link=/tmp/ttyZ2M,mode=777
+  slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5
+  options: "-d -d"
+  log: false
+mqtt:
+  base_topic: zigbee2mqtt
+  server: mqtt://core-mosquitto:1883
+  user: mqtt_adm
+  password: euphaPueriesaif9aeghoh4ohdi7Lohgaetua4hahjeijai
+serial:
+  port: tcp://192.168.169.21:6638
+  baudrate: 115200
+  adapter: ezsp
+advanced:
+  transmit_power: 20
+zigbee_herdsman_debug: false
+homeassistant: true
+</code>
 # RFXcom